(1)先敞开机箱电源，随后打开计算机，运作测验东西，留意观查运维办理系统灯是不是以定频率闪烁，以检在系统软件是不是工作中一切正常。

(1) First turn on the power supply of the chassis, then turn on the computer, run the test, and pay attention to whether the lights of the operation and maintenance management system flash at a fixed frequency to check whether everything is normal in the system software.

(2)反方向滚动试验汽体气瓶总闸阀，随后顺时针方向调整输出压阀0.4mpao

(2) Roll the main gate valve of the gas cylinder in the reverse direction, and then adjust the output pressure valve clockwise to 0.4mpao

(3)用专用型采样器取下需要的试件3个，随后在低信变大地底查验创伤，试件边缘应无装缝隙及伤痕，试件表层整平无刮伤无毁坏。

(3) Take down 3 required test pieces with a special sampler, and then check the wound on the low signal transformer earth bottom. The edge of the test piece shall be free of installation gaps and scars, and the surface of the test piece shall be leveled without scratches and damage.

(4)按Gb2918调整接口测验的温度湿度，时间不少于4钟头。

(4) Adjust the temperature and humidity of the interface test according to gb2918, and the time shall not be less than 4 hours.

(5)将选好的试件放人检测腔台，先后摆放，完全遮住检测。塑料软包装原材料复合型加工工艺及机器设备。腔表层，随后盖紧检测腔上腔，扭紧摇杆卡紧试件。

(5) Put the selected test pieces on the test chamber table and place them one after another to completely cover the test. Composite processing technology and machine equipment for plastic flexible packaging raw materials. The surface layer of the cavity, then cover the upper cavity of the detection cavity, tighten the rocker and clamp the test piece.

(6)在电脑上主屏上点一下“客户信息设定”键，输人相对应的功能参数(b)试件薄厚、丈量时间)、点一下“存盘撤出”键。

(6) Click the "customer information setting" button on the main screen of the computer, input the corresponding functional parameters (b) specimen thickness and measurement time) and click the "save and withdraw" button.

(7)在电脑显现屏上点一下“试验”键，仪器设备逐步试验。

(7) Click the "test" button on the computer display screen to test the instrument and equipment step by step.

(8)在检测全过程中，不可离去仪器设备，认真调查电脑上屏幕上显现的试验曲线图，当曲线图的平行线一部分超出手机软件设置的-大格横坐标轴范畴时，标明试验数据信息已趋于平稳，能够结束试验，点一下“停止”键，停止试验。

(8) In the whole process of testing, do not leave the instrument and equipment, and carefully investigate the test curve displayed on the screen of the computer. When part of the parallel lines of the curve exceeds the range of - large grid abscissa axis set by the mobile phone software, it indicates that the test data information has become stable and can end the test. Click the "stop" button to stop the test.

(9)系统主动弹出来测验报告，纪录试验数据信息，点一下“贮存”键交还主屏。

(9) The system will pop up the test report, record the test data and information, and click the "save" button to return it to the main screen.

（10)旋放手柄敞开检测上腔取下试件拆换迅速定量滤纸和试件，重复流程(6)、(7)、(8)、(9)、再次展开试验。

(10) Rotate and release the handle to open the upper chamber for detection, remove the test piece, replace the quick quantitative filter paper and test piece, repeat the process (6), (7), (8) and (9) and unfold the test again.

以上就是为大家介绍的有关济南订做食品包装袋的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.jingmeisuliao.com

The above is the detailed introduction about Jinan customized food packaging bags. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.jingmeisuliao.com